Rauch QUANTRON-K2, Инструкция по эксплуатации

Страница: 80 / 102

Spreading operation using the QUANTRON-K2 Control unit 5
74
To restore a symmetrical spreading pattern, proceed as follows.
1. Select the desired adjustment function using the L/R key.
2. Bring the left or right side to the same position using the F1 or F2 key.
3. Press the L/R key until both sides can be adjusted simultaneously
(see Figure 5.7 )
4. Select the position 0.0 in the Half-side slide menu
 The spreading pattern is symmetrical.
Figure 5.7: Symmetrical spreading pattern
NOTICE
The symmetrical spreading pattern is active as soon as both sides can be ad-
justed simultaneously (refer to
Figure 5.7 ) and the actuators are set to one of
the limit stops (bottom or top).