Rauch QUANTRON-K2, Инструкция по эксплуатации

Страница: 50 / 102

Operation QUANTRON-K2 4
44
Recalibrating the speed signal:
You can either overwrite an existing profile or create a profile in an empty memory
location.
1. Highlight the desired memory location in the Tractor calibration (km/h)
menu using the function key below.
2. Highlight the New calibration field.
3. Press the Enter key .
 The calibration menu is displayed.
Figure 4.13: Calibration menu
[1] Tractor type name field
[2] Display of origin of speed signal
[3] Display of number of pulses over 100m
[4] F4 function key: Automatic calibration submenu
[5] F2 function key: Radar pulse transducer
[6] F1 function key: Wheel pulse transducer
4. Highlight the Tractor name field [1].
5. Press the Enter key .
6. Enter the name of the profile.
Entering text into the control unit is described in section 4.11.1: Text input,
page 63 .
7. Select the pulse transducer for the speed signal.

For Radar pulse press the F1 function key [5].

For Wheel pulse press the F2 function key [6].
 The display shows the pulse transducer [2].
NOTICE
The input of the name is restricted to 16 characters .
We recommend using the name of the tractor for ease of understanding.
1
2
4
3
5
6