Rauch QUANTRON-K2, Инструкция по эксплуатации

Страница: 38 / 102

Operation QUANTRON-K2 4
32
4.5.2 Spreading width
In this menu, the working width can be set (in metres).
1. Call up the Spreading mat. settings > Spreading width menu.
 The display shows the currently set spreading width.
2. Enter the new value in the input field.
See chapter
4.11.2: Input of values using the cursor keys, page 65 .
3. Confirm input by pressing the Enter key .
 The new value is saved in the control unit.
NOTICE
The Spreading width can only have a value between 1 and 10 metres .
NOTICE
When the Dispersion AUTO function is active , the following values are auto-
matically adjusted when the spreading width is changed:

Spreading width limitation

Metering slide position

Half-side slide position

Disc speed ( only for the HydroControl version ).
When the Dispersion AUTO function is deactivated , you must manually enter
the values in the respective menus.