Chapter 4: KX III Administrator Help
45
Rack PDU (Power Strip) Outlet Control
Overview
The KX III allows you to control Raritan PX and RPC series rack PDU
(power strip) outlets connected to the KX III through a D2CIM-PWR.
Once a PX or RPC series is setup and then attached to the KX III, the
rack PDU and its outlets can be controlled from the Powerstrip page in
the KX III interface. This page is accessed by clicking on the Power
menu at the top of the page.
The Powerstrip page will display rack PDUs attached to the KX III for
which the user has been granted appropriate port access permissions. In
the case of tiered configurations, the Powerstrip page will display both
rack PDUs attached to the base and tiered KX IIIs, for which the user
has been granted appropriate port access permissions.
Note: For information on setting up a PX, see the
Raritan PX User
Guide
.
From the Powerstrip page, you are able to turn the outlets on and off, as
well as cycle their power. You are also able to view the following power
strip and outlet information:
Powerstrip Device Information:
Name
Model
Temperature
Current Amps
Maximum Amps
Voltage
Power in Watts
Power in Volts Ampere
Outlet Display Information:
Name - Named assigned to the outlet when it was configured.
State - On or Off status of the outlet.
Control - Turn outlets on or off, or cycle their power.
Association - The ports associated with the outlet.
Содержание dominion kx III
