Raritan dominion kx III, Руководство администратора

Страница: 206 / 392

Chapter 4: KX III Administrator Help
194
Common Commands for All Command Line Interface Levels
Following are the commands that are available at all CLI levels. These
commands also help navigate through the CLI.
Commands Description
top Return to the top level of the CLI hierarchy, or the
“username” prompt.
history Display the last 200 commands the user entered
into the KX III CLI.
help Display an overview of the CLI syntax.
quit Places the user back one level.
logout Logs out the user session.
Initial Configuration Using CLI
Note: These steps, which use the CLI, are optional since the same
configuration can be done via KVM. See
Getting Started (on page 9) for
more information.
KX III devices come from the factory with default factory settings. When
you first power up and connect to the device, you must set the following
basic parameters so the device can be accessed securely from the
network:
1. Reset the administrator password. All KX III devices are shipped with
the same default password. Therefore, to avoid security breaches it
is imperative that you change the admin password from raritan to
one customized for the administrators who will manage the KX III
device.
2. Assign the IP address, subnet mask, and gateway IP address to
allow remote access.
Setting Parameters
To set parameters, you must be logged on with administrative privileges.
At the top level, you will see the
"Username" >
prompt, which for the
initial configuration is
"admin"
. Enter the top command to return to the
top menu level.
Note: If you have logged on with a different user name, that user name
will appear instead of admin.