Raritan dominion kx III, Руководство администратора

Страница: 49 / 392

Chapter 4: KX III Administrator Help
37
Change the Default Password
The first time you start the KX III, you are required to change the default
password.
To change the default password:
1. Once the unit has booted, enter the default username admin and
password raritan . Click Login.
2. Enter the old password raritan , then enter and reenter a new
password.
Passwords can be up to 64 characters in length consisting of English,
alphanumeric and special characters.
3. Click Apply. Click OK on the Confirmation page.
Assign the KX III an IP Address
To assign an IP address to the KX III:
1. Choose Device Settings > Network. The Network Settings page
opens.
2. Specify a meaningful Device Name for your KX III device.
Up to 32 alphanumeric and valid special characters, no spaces
between characters.
3. Next, configure the IPv4, IPv6 and DNS settings.
Configure the IPv4 Settings
1. In the IPv4 section, enter or select the appropriate IPv4-specific
network settings:
a. Enter the IP Address if needed. The default IP address is
192.168.0.192.
b. Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
c. Enter the Default Gateway if None is selected from the IP Auto
Configuration drop-down.
d. Enter the Preferred DHCP Host Name if DHCP is selected from
the IP Auto Configuration drop-down.
e. Select the IP Auto Configuration. The following options are
available:

None (Static IP) - This option requires you manually specify the
network parameters.
This is the recommended option because the KX III is an
infrastructure device, and its IP address should not change.