• Deceleration
Mechanical drive
Forklift
Let
off
the accelerator pedal to slow down the forklift
When the gear-shift lever is placed in 2nd gear, just change it to
1st gear to slow down the
forklift
.
Fluid drive
Forklift
Slightly let
off
the accelerator pedal and slightly step on the brake
pedal if needed.
• Steering
Different from ordinary vehicle, the forklift is
rear-wheel-steering, the rear counterweight spins outward while the
truck is steering. Please slow down first, and turn the steering wheel to
the direction you need to steering to. You have to turn the steering
wheel in advance slightly before the truck which is
front-wheel-steering. The maximum speed while steering is 1/3 of the
maximum speed while the truck is running.
• Loading
25
*
Adjust the distance between the two forks based on cargo's
dimension (pull out the position pin and push the forks left or right).
*
Make the
forklift
directly face the cargo in order to load it.
*
When using the forks to fetch the cargo, try best to extend the forks
deeply beneath the cargo and avoid the tip of the fork to touch other
cargo or items.
*
Lift up the cargo for 2-
4
in then back up.
*
Descend the mast to keep the cargo
6-8in
from the ground, then tilt
back the smallest mast to stable the cargo to prevent it sliding back.
• Stacking
*
Slow down when approaching the cargo site and stop the
forklift
right front the cargo.
*
Tilt forward the mast till the forks are horizontal, then lift the forks up
little above the unloading position.
*
Slowly move forward the Forklift and place the cargo to
unloading position, then descend the mast, pull out the forks.
26
Ranko R55 Forklift
Operator's Maintenance Manual
Operation &Use
Ranko R55 Forklift
Operator's Maintenance Manual
Operation &Use
