R&S SpycerNode 2U12 Скачать руководство пользователя

Страница: 118 / 136

Maintenance

5U Enclosures

SpycerNode

118

User Manual | 2902.3266.02 - 08

Push down and hold the red release latch (1) and pull the module out by
its handle (2).

Pull the module out completely.

The cooling module is successfully removed.

Installing a Cooling Module

Perform the following steps:

Rotate the cooling module so that the red release latch and handle are
on the right-hand side.

Slide the cooling module into its slot until the latch clicks home. The
enclosure will automatically detect and make use of the new unit.

The cooling module is successfully installed.

Overheating damage

An incorrect airflow can damage components.

The cooling module bay must not be empty for more
than two minutes while the enclosure is powered.

Содержание SpycerNode 2U12









































































































































Результаты поиска

Содержание SpycerNode 2U12

Отзывы:

Похожие инструкции для SpycerNode 2U12

Бренды по названию

Популярные бренды

R&S SpycerNode 2U12, Руководство пользователя

Результаты поиска

Содержание SpycerNode 2U12

Отзывы:

Похожие инструкции для SpycerNode 2U12

Бренды по названию

Популярные бренды