Installation
Mounting the System into a Rack
SpycerNode
42
User Manual | 2902.3266.02 - 08
5U Enclosures
Perform the following steps:
1.
To facilitate access, remove the door from the rack.
2.
Ensure the pre-assembled rails are at their shortest length.
3.
Locate the rail location pins inside the front of the rack and extend the
length of the rail assembly to enable the rear location pins to locate.
Ensure the pins are fully located in the square or round holes in the rack
posts.
4.
Fully tighten all clamping screws (left and right) and middle slide locking
screws.
5.
Ensure the rear spacer clips (x4) are fitted tight to the edge of the rack
post.
6.
Slide the enclosure fully home on its rails.
A Torx T20 screwdriver is needed to lock and unlock the drawers.
Содержание SpycerNode 2U12
