R&S SpycerNode 2U12, Руководство пользователя

Страница: 54 / 136

Configuration
R&S Network Switch Configuration
SpycerNode
54
User Manual | 2902.3266.02 - 08
R&S Network Switch Configuration
The R&S network switch need an initial configuration before it can be acces-
sible for management. For best performance your network topology must
support jumbo frames.
Perform the following steps:
1. Connect the power supply.
2. Connect the serial port of the host PC to the console port of the switch
with the DB9 to RJ-45 cable. If your host PC does not have a native
serial port you can use a USB-to-RS232-Adapter.
3. Open terminal program (recommended: P
UTTY
).
4. Configure a serial terminal program.
5. Log in:
Configure a static IP for Management Interface
Perform the following steps:
•
Use the following commands:
switch [master] (config) # no interface mgmt0 dhcp
switch [master] (config) # interface mgmt0 ip address <IP>
<NETMASK>
Parameter Settings
Baud rate 115200
Data bits 8
Stop bits 1
Parity None
Flow control None
OS Username Password
MLNX-OS admin admin