R&S 1322.8003K06, Руководство пользователя

Страница: 194 / 555

Data Management
R&S
®
FSPN
194 User Manual 1179.4363.02 ─ 01
Remote command:
MMEMory:COMMent
on page 452
8.2.3 How to Save and Load Instrument Settings
Instrument settings can be saved to a file and loaded again later, so that you can
repeat the measurement with the same settings. Optionally, user-defined measurement
settings can automatically be restored each time you start or preset the instrument.
To save and recall instrument settings using the Quick Save function
1. Select the "Save" icon from the toolbar.
2. Select whether the instrument settings for all "Channel" s are stored, or only those
for the current "Channel" .
3. Select one of the save sets in which the settings are stored ( "QuickSaveX" ).
The selected settings are stored to the file
C:\R_S\INSTR\QuickSave\QuickSaveX.dfl
.
Note: If you make any changes to the settings after storing the configuration file,
remember to save the settings again. Otherwise those settings cannot be restored
and will be overwritten by the stored values when the configuration file is recalled.
4. To restore the settings, select the "Open" icon from the toolbar.
5. Select the save set in which the settings were stored ( "QuickSaveX" ).
The selected settings are restored to the instrument or channel.
To save configurable instrument settings
1. Select the "Save" icon from the toolbar.
2. In the "Save" dialog box, switch to the "Save" tab.
3. In the file selection dialog box, select a filename and storage location for the set-
tings file.
4. Optionally, define a comment to describe the stored settings.
5. Select whether the instrument settings for all "Channel" s are stored, or only those
for the current "Channel" .
6. Select the items to be saved with the settings. Either the settings for the currently
selected "Channel" only, or the settings for all "Channel" s can be stored. Various
other items, such as lines or traces etc., can be stored as well (see
Chap-
ter 8.2.2.1, "Stored Data Types" , on page 189).
7. Select "Save" .
A file with the defined name and path and the extension
.dfl
is created.
Storing and Recalling Instrument Settings and Measurement Data