R&S 1129.7246.03, Руководство по эксплуатации

Страница: 741 / 855

R&S ESU Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
6.302 Operating Manual 1302.6163.12 - 03
R&S
ESU CALCulate<1|2>:MATH:MODE LINear | LOGarithmic affects all traces on the
R&S ESU; therefore the
numeric suffix :
MATH<1...4> is not
allowed for the
R&S ESU
FSE CALCulate<1|2>:MATH<1...4>:MODE LINear | LOGarithmic for FSE, only the trace
indicated by a numeric
suffix is affected
R&S
ESU CALCulate<1|2>:MATH:POS -100PCT to 200PCT new function for
R&S ESU; replacement
for CALC:RLINe of the
FSE
R&S
ESU FSE CALCulate<1|2>:MATH:STATe ON | OFF for R&S ESU, traces
can only be subtracted
from trace 1; therefore
there is no numeric suffix
behind :MATH
R&S
ESU FSE CALCulate<1|2>:MATH[:EXPRession][:DEFine] <expr> for R&S ESU, traces
can only be subtracted
from trace 1; therefore
there is no numeric suffix
behind :MATH and
<expr> may only consist
of (TRACE1-TRACE2)
or (TRACE1-TRACE3)
FSE CALCulate<1|2>:RLINe MIN to MAX not available for
R&S ESU (replaced by
CALC:MATH:POS)
FSE CALCulate<1|2>:RLINe:STATe ON | OFF not available for
R&S ESU (replaced by
CALC:MATH:POS)
R&S
ESU FSE CALCulate<1|2>:THReshold MIN to MAX
R&S
ESU FSE CALCulate<1|2>:THReshold:STATe ON | OFF
FSE CALCulate<1|2>:TLINe<1|2> 0 to 1000s not available on the
R&S ESU; replaced by
CALC:SLIMits:LEFT and
CALC:SLIMits:RIGHt
FSE CALCulate<1|2>:TLINe<1|2>:STATe ON | OFF not available on the
R&S ESU; replaced by
CALC:SLIMits:LEFT and
CALC:SLIMits:RIGHt
FSE CALCulate<1|2>:UNIT:ANGLe DEG | RAD not available for
R&S ESU
R&S
ESU CALCulate<1|2>:UNIT:POWer DBM | V | A | W | DBPW
| WATT | DBUV | DBMV
| VOLT | DBUA |
AMPere available units are
compatible to the FSE
Devices Command (Sheet 14 of 47) Parameter Notes