RAM 2500 2019, Руководство пользователя

Страница: 18 / 332

GETTING TO KNOW YOUR VEHICLE
16
locked and closed, the vehicle security light,
in the instrument panel cluster, will flash
rapidly for about 16 seconds to indicate that
the alarm is being set. After the alarm is set,
the vehicle security light will flash at a slower
rate to indicate that the system is armed.
To Disarm The System
The vehicle security alarm can be disarmed
using any of the following methods:
1. Push the unlock button on the key fob.
2. Grasp the Passive Entry Unlock Door
Handle with a valid key fob within 5 ft
(1.5 m) of the passive entry door handle.
If equipped, refer to "Keyless Enter-N-Go
— Passive Entry" in "Getting To Know
Your Vehicle" for further information.
3. Place the ignition out of the “OFF” posi -
tion.
The vehicle security alarm is designed to
protect your vehicle. However, you can create
conditions where the system will give you a
false alarm. If one of the previously
described arming sequences has occurred,
the vehicle security alarm will arm regardless
of whether you are in the vehicle or not. If
you remain in the vehicle and open a door,
the alarm will sound. If this occurs, disarm
the vehicle security alarm.
If the vehicle security alarm is armed and the
battery becomes disconnected, the vehicle
security alarm will remain armed when the
battery is reconnected; the exterior lights will
flash, and the horn will sound. If this occurs,
disarm the vehicle security alarm.
DOORS
Power Side Steps — If Equipped
The Power Side Steps will extend a step for
easier entry and exit of the vehicle.
When configured for “Auto” mode, the Power
Side Steps will deploy when either the
driver’s or passenger’s side door is opened,
or when the deploy setting is activated
through the touchscreen. When configured
for “Store” mode, the steps will stay in their
position but can also be deployed manually
through the radio.
If the vehicle speed exceeds 5 mph (8 km/
h), or if the retract setting is selected in the
touchscreen, the steps will retract.
Refer to “Uconnect Settings” in “Multi -
media” in the Owner’s Manual for additional
information.
Keyless Enter-N-Go — Passive Entry
The Passive Entry system is an enhancement
to the vehicle’s Remote Keyless Entry system
and a feature of Keyless Enter-N-Go. This
feature allows you to lock and unlock the
vehicle’s door(s) without having to push the
key fob lock or unlock buttons.
NOTE:

Refer to “Uconnect Settings” in “Multi -
media” in the Owner’s Manual for further
information.

If wearing gloves on your hands, or if it has
been raining/snowing on the Passive Entry
door handle, the unlock sensitivity can be
affected, resulting in a slower response
time.

If the vehicle is unlocked by Passive Entry
and no door is opened within 60 seconds,
the vehicle will re-lock and if equipped
will arm the security alarm.
2019_RAM_2500_3500_UG_USA=GUID-8BBFE451-BF24-4E82-808A-AE2460D39A05=1=en=.book Page 16