RAM 2500 2019, Руководство пользователя

Страница: 173 / 332

171
The system is deactivated in the following
conditions if it was activated
manually from
the Uconnect controls menu via the
Surround View button, Backup Camera
button, Cargo Camera button or Forward
Facing Camera button:

The "X" button on the display is pressed

Vehicle is shifted into PARK

Ignition is placed in the OFF position

Vehicle speed is over 8 mph (13 km/h) for
10 seconds
NOTE:
If the Surround View Camera, Cargo Camera,
Backup Camera, or Forward Facing Camera
is activated manually, and the vehicle is
shifted into REVERSE, deactivation methods
for automatic activation are assumed.
The camera delay system is turned off manu -
ally through the Uconnect settings menu.
Refer to “Uconnect Settings” in “Multi
-
media” in the Owner’s Manual for further
information.
NOTE:

If snow, ice, mud, or any foreign
substance builds up on the camera lenses,
clean the lenses, rinse with water, and dry
with a soft cloth. Do not cover the lenses.

If a malfunction with the system has
occurred, see an authorized dealer.
Cargo Camera With Dynamic Centerline — If
Equipped
The Dynamic Centerline feature provides an
overlay on the Cargo Camera display screen
that aligns to the center of the pickup box to
aid in hooking up a fifth wheel camper or
gooseneck trailer. The centerline auto aligns
to the center of the pickup box, and can also
be manually adjusted. The centerline will
adjust in response to steering angle inputs,
and will not obstruct the gooseneck receiver
or an approaching trailer gooseneck in the
camera feed.
Activation
The Dynamic Centerline feature can be acti -
vated through the Uconnect settings by
pressing the Cargo Camera soft button,
followed by the “Dynamic Centerline” soft
button on the touchscreen.
If the Dynamic Centerline feature is turned
on, the overlay will display anytime the Cargo
Camera image is displayed.
Adjusting Centerline
Follow the steps below to manually adjust
the centerline:
1. Press the “Adjust Centerline” soft button
located in the bottom right corner of the
Cargo Camera display.
2. Use the arrows on the bottom left corner
of the Cargo Camera display to adjust the
centerline horizontally or vertically.
3. Once the desired position is achieved,
press the “Accept” button to set the
centerline to the newly specified posi
-
tion.
Deactivation
The Dynamic Centerline feature will auto -
matically be deactivated whenever the Cargo
Camera display is deactivated. It can also be
manually deactivated through the Uconnect
settings.
Cargo Camera Zoom View
When the Cargo Camera image is
being displayed, and the vehicle
speed is below 8 mph (13 km/h)
while in any gear selector position,
Zoom View is available. By pressing the
2019_RAM_2500_3500_UG_USA=GUID-8BBFE451-BF24-4E82-808A-AE2460D39A05=1=en=.book Page 171