RAM 2500 2019, Руководство пользователя

Страница: 153 / 332

151
To exit ERS mode, simply push and hold the
ERS (+) switch until the gear limit display
disappears from the instrument cluster.
NOTE:
To select the proper gear position for
maximum deceleration (engine braking),
simply push and hold the ERS (-) switch. The
transmission will shift to the range from
which the vehicle can best be slowed down.
FOUR-WHEEL DRIVE
OPERATION — IF EQUIPPED

Four-wheel drive trucks are equipped with
either a manually shifted transfer case or
an electronically shifted transfer case.
Refer to the operating instructions for
electronic transfer case, located in this
section for further information.

For further information on the manually
shifted transfer case, refer to “Four Wheel
Drive Operation” in “Starting And Oper
-
ating” in your Owner’s Manual.
Four-Position Electronically Shifted
Transfer Case — If Equipped
This is an electronic shift transfer case and
is operated by the 4WD Control Switch
(Transfer Case Switch), which is located on
the instrument panel.
Four-Position Transfer Case
This electronically shifted transfer case
provides four mode positions:

Two-Wheel Drive High Range (2WD)

Four-Wheel Drive High Range (4WD
HIGH)

Four-Wheel Drive Low Range (4WD LOW)

Neutral (NEUTRAL)
For additional information on the appropriate
use of each transfer case mode position, see
the information below:
WARNING!
Do not downshift for additional engine
braking on a slippery surface. The drive
wheels could lose their grip and the
vehicle could skid, causing a collision or
personal injury.
Transmis -
sion Gear
Limit
Display
1 2 3 4 5 6 D
Actual
Gear(s)
Allowed 1 1-2 1-3 1-4 1-5 1-6 1-6
CAUTION!
When using ERS for engine braking while
descending steep grades, be careful not to
overspeed the engine. Apply the brakes as
needed to prevent engine overspeed.
2019_RAM_2500_3500_UG_USA=GUID-8BBFE451-BF24-4E82-808A-AE2460D39A05=1=en=.book Page 151