RAM 2500 2019, Руководство пользователя

Страница: 15 / 332

13
(Continued)
NOTE:
In case the ignition switch does not change
with the push of a button, the key fob may
have a low or dead battery. In this situation,
a back up method can be used to operate the
ignition switch. Put the nose side (side oppo
-
site of the emergency key) of the key fob
against the ENGINE START/STOP button,
with your foot applied on the brake pedal,
and push to operate the ignition switch.
Keyless Push Button Ignition
The push button ignition can be placed in
the following modes:
OFF

The engine is stopped.

Some electrical devices (e.g. Central
locking, alarm, etc.) are still available.
ACC

Engine is not started.

Some electrical devices are available.
RUN

Driving position.

All the electrical devices are available.
START

The engine will start.
WARNING!

When exiting the vehicle, always remove
the key fob from the vehicle and lock
your vehicle.

Never leave children alone in a vehicle,
or with access to an unlocked vehicle.

Allowing children to be in a vehicle unat -
tended is dangerous for a number of
reasons. A child or others could be seri
-
ously or fatally injured. Children should
be warned not to touch the parking
brake, brake pedal or the gear selector.

Do not leave the key fob in or near the
vehicle, or in a location accessible to
children, and do not leave the ignition of
a vehicle equipped with Keyless
Enter-N-Go in the ON/RUN mode. A
child could operate power windows,
other controls, or move the vehicle.

Do not leave children or animals inside
parked vehicles in hot weather. Interior
heat build-up may cause serious injury or
death.
CAUTION!
An unlocked vehicle is an invitation for
thieves. Always remove key fob from the
vehicle and lock all doors when leaving the
vehicle unattended.
WARNING! (Continued)
2019_RAM_2500_3500_UG_USA=GUID-8BBFE451-BF24-4E82-808A-AE2460D39A05=1=en=.book Page 13