RAM Commercial Chassis Cab 3500 2019 Скачать руководство пользователя страница 164

Страница: 164 / 607

162 SAFETY

ABS is designed to function with the OEM tires. Modification

may result in degraded ABS performance.

Anti-Lock Brake Warning Light

The yellow “Anti-Lock Brake Warning Light” will turn on

when the ignition is turned to the ON/RUN mode and may

stay on for as long as four seconds.
If the “Anti-Lock Brake Warning Light” remains on or comes

on while driving, it indicates that the anti-lock portion of the

brake system is not functioning and that service is required.

However, the conventional brake system will continue to

operate normally if the “Anti-Lock Brake Warning Light” is

on.
If the “Anti-Lock Brake Warning Light” is on, the brake

system should be serviced as soon as possible to restore the

benefits of anti-lock brakes. If the “Anti-Lock Brake Warning

Light” does not come on when the ignition is turned to the

ON/RUN mode, have the light repaired as soon as possible.

Electronic Brake Control System

Your vehicle is equipped with an advanced Electronic Brake

Control system (EBC). This system includes Electronic Brake

Force Distribution (EBD), Anti-Lock Brake System (ABS),

Brake Assist System (BAS), Hill Start Assist (HSA), Traction

Control System (TCS), Electronic Stability Control (ESC),

and Electronic Roll Mitigation (ERM). These systems work

together to enhance both vehicle stability and control in

various driving conditions.
Your vehicle may also be equipped with Trailer Sway

Control (TSC) and Hill Descent Control (HDC).

• The ABS cannot prevent the natural laws of physics

from acting on the vehicle, nor can it increase braking

or steering efficiency beyond that afforded by the

condition of the vehicle brakes and tires or the traction

afforded.

• The ABS cannot prevent collisions, including those

resulting from excessive speed in turns, following

another vehicle too closely, or hydroplaning.

• The capabilities of an ABS equipped vehicle must

never be exploited in a reckless or dangerous manner

that could jeopardize the user’s safety or the safety of

others.

WARNING!

(Continued)

Содержание Chassis Cab 3500 2019
































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы:

Похожие инструкции для Chassis Cab 3500 2019

Бренды по названию

Популярные бренды

RAM Commercial Chassis Cab 3500 2019, Руководство пользователя

Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы:

Похожие инструкции для Chassis Cab 3500 2019

Бренды по названию

Популярные бренды