RAM Commercial Chassis Cab 3500 2019 Скачать руководство пользователя страница 487

Страница: 487 / 607

TECHNICAL SPECIFICATIONS

485

CAUTION!

• Mixing of engine coolant (antifreeze) other than speci

fied Organic Additive Technology (OAT) engine

coolant (antifreeze), may result in engine damage and

may decrease corrosion protection. Organic Additive

Technology (OAT) engine coolant is different and

should not be mixed with Hybrid Organic Additive

Technology (HOAT) engine coolant (antifreeze) or any

“globally compatible” coolant (antifreeze). If a

non-OAT engine coolant (antifreeze) is introduced into

the cooling system in an emergency, the cooling system

will need to be drained, flushed, and refilled with fresh

OAT coolant (conforming to MS.90032), by an autho

rized dealer as soon as possible.

• Do not use water alone or alcohol-based engine coolant

(antifreeze) products. Do not use additional rust inhib

itors or antirust products, as they may not be compat

ible with the radiator engine coolant and may plug the

radiator.

• This vehicle has not been designed for use with

propylene glycol-based engine coolant (antifreeze).

Use of propylene glycol-based engine coolant (anti

freeze) is not recommended.

Содержание Chassis Cab 3500 2019
































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы:

RAM Commercial Chassis Cab 3500 2019, Руководство пользователя, Страница: 487 / 607

Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы: