RAM Commercial Chassis Cab 3500 2019 Скачать руководство пользователя страница 87

Страница: 87 / 607

GETTING TO KNOW YOUR VEHICLE

Driver and Passenger Temperature Up and Down Buttons

Provides the driver and passenger with independent temperature control. Push the red button on the

faceplate or touchscreen or press and slide the temperature bar towards the red arrow button on the

touchscreen for warmer temperature settings. Push the blue button on the faceplate or touchscreen or

press and slide the temperature bar towards the blue arrow button on the touchscreen for cooler

temperature settings.

NOTE:

The numbers within the temperature display will only appear if the system is equipped with an auto

matic climate control system.

SYNC

Press the SYNC button on the touchscreen to toggle the SYNC feature on/off. The SYNC indicator is

illuminated when this feature is enabled. SYNC is used to synchronize the passenger temperature

setting with the driver temperature setting. Changing the passenger’s temperature setting while in

SYNC will automatically exit this feature.

NOTE:

The SYNC button is only available on the touchscreen.

Icon

Description

Содержание Chassis Cab 3500 2019
































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы:

RAM Commercial Chassis Cab 3500 2019, Руководство пользователя, Страница: 87 / 607

Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы: