RAM Commercial Chassis Cab 3500 2019 Скачать руководство пользователя страница 177

Страница: 177 / 607

SAFETY

175

When the system determines a collision with the vehicle in

front of you is no longer probable, the warning message will

be deactivated.

NOTE:

• The minimum speed for FCW activation is 3 mph (5 km/h).
• The FCW alerts may be triggered on objects other than

vehicles such as guard rails or sign posts based on the

course prediction. This is expected and is a part of normal

FCW activation and functionality.

• It is unsafe to test the FCW system. To prevent such misuse

of the system, after four Active Braking events within a

key cycle, the Active Braking portion of FCW will be deac

tivated until the next key cycle.

• The FCW system is intended for on-road use only. If the

vehicle is taken off-road, the FCW system should be deac

tivated to prevent unnecessary warnings to the surround

ings.

FCW Braking Status And Sensitivity

The FCW sensitivity and Active Braking status are program

mable through the Uconnect System. Refer to “Uconnect

Settings” in “Multimedia” in the Owner's Manual for further

information.
• Far

• When the sensitivity of FCW is set to the “Far” setting

and the system status is “Warning and Braking”, this

allows the system to warn the driver of a possible more

distant collisions with the vehicle in front using

audible/visual warnings.

• More cautious drivers that do not mind frequent warn

ings may prefer this setting.

WARNING!

Forward Collision Warning (FCW) is not intended to

avoid a collision on its own, nor can FCW detect every

type of potential collision. The driver has the

responsibility to avoid a collision by controlling the

vehicle via braking and steering. Failure to follow this

warning could lead to serious injury or death.

Содержание Chassis Cab 3500 2019
































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы:

Похожие инструкции для Chassis Cab 3500 2019

Бренды по названию

Популярные бренды

RAM Commercial Chassis Cab 3500 2019, Руководство пользователя

Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы:

Похожие инструкции для Chassis Cab 3500 2019

Бренды по названию

Популярные бренды