RAM Commercial Chassis Cab 3500 2019 Скачать руководство пользователя страница 491

Страница: 491 / 607

MULTIMEDIA

489

The risk of unauthorized and unlawful access to your vehicle

systems may still exist, even if the most recent version of

vehicle software (such as Uconnect software) is installed.

NOTE:

• FCA US LLC or your dealer may contact you directly

regarding software updates.

• To help further improve vehicle security and minimize the

potential risk of a security breach, vehicle owners should:

• Routinely check

www.driveuconnect.com

(U.S. Resi

dents) or

www.driveuconnect.ca

(Canadian Residents)

to learn about available Uconnect software updates.

• Only connect and use trusted media devices (e.g.

personal mobile phones, USBs, CDs).

Privacy of any wireless and wired communications cannot

be assured. Third parties may unlawfully intercept informa

tion and private communications without your consent. For

further information, refer to “Data Collection & Privacy” in

your Uconnect Owner’s Manual Supplement or “Onboard

Diagnostic System (OBD II) Cybersecurity” in “Getting To

Know Your Instrument Panel”.

WARNING!

• It is not possible to know or to predict all of the

possible outcomes if your vehicle’s systems are

breached. It may be possible that vehicle systems,

including safety related systems, could be impaired or

a loss of vehicle control could occur that may result in

an accident involving serious injury or death.

• ONLY insert media (e.g., USB, SD card, or CD) into

your vehicle if it came from a trusted source. Media of

unknown origin could possibly contain malicious soft

ware, and if installed in your vehicle, it may increase

the possibility for vehicle systems to be breached.

• As always, if you experience unusual vehicle behavior,

take your vehicle to your nearest authorized dealer

immediately.

Содержание Chassis Cab 3500 2019
































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы:

RAM Commercial Chassis Cab 3500 2019, Руководство пользователя, Страница: 491 / 607

Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы: