RAM Commercial Chassis Cab 3500 2019 Скачать руководство пользователя страница 210

Страница: 210 / 607

208 SAFETY

Supplemental Side Air Bag Inflatable Curtain (SABIC) La

bel Location

SABICs (if equipped with SABICs) may help reduce the risk

of head and other injuries to front and rear seat outboard

occupants in certain side impacts, in addition to the injury

reduction potential provided by the seat belts and body

structure.
The SABIC deploys downward, covering the side windows.

An inflating SABIC pushes the outside edge of the headliner

out of the way and covers the window. The SABICs inflate

with enough force to injure occupants if they are not belted

and seated properly, or if items are positioned in the area

where the SABICs inflate. Children are at an even greater

risk of injury from a deploying air bag.
The SABICs (if equipped with SABICs) may help reduce the

risk of partial or complete ejection of vehicle occupants

through side windows in certain side impact events.

WARNING!

• Do not mount equipment, or stack luggage or other

cargo up high enough to block the deployment of the

SABICs. The trim covering above the side windows

where the SABIC and its deployment path are located

should remain free from any obstructions.

• In order for the SABICs to work as intended, do not

install any accessory items in your vehicle which could

alter the roof. Do not add an aftermarket sunroof to

your vehicle. Do not add roof racks that require perma

nent attachments (bolts or screws) for installation on

the vehicle roof. Do not drill into the roof of the vehicle

for any reason.

Содержание Chassis Cab 3500 2019
































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы:

RAM Commercial Chassis Cab 3500 2019, Руководство пользователя, Страница: 210 / 607

Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы: