RAM Commercial Chassis Cab 3500 2019 Скачать руководство пользователя страница 337

Страница: 337 / 607

STARTING AND OPERATING

335

Forward Facing Camera With Tire Lines — If Equipped

The Forward Facing Camera displays a front view image of

the road ahead, along with tire lines to guide the driver when

driving on narrow roads.

Activation

The Forward Facing Camera can be activated by pressing the

Forward Camera soft button on the touchscreen.
Once activated, the camera image will remain on as long as

the vehicle speed is below 8 mph (13 km/h).

Deactivation

The Forward Facing Camera is deactivated in the following

conditions:
• The vehicle speed exceeds 8 mph (13 km/h) for 10

seconds.

• The “X” button on the display is pressed.
• Vehicle is shifted into PARK.
• Ignition is cycled to OFF.

NOTE:

The Forward Facing Camera cannot be deactivated when the

vehicle is in 4LO.

Trailer Reverse Guidance — If Equipped

The Trailer Reverse Guidance feature assists the driver in

backing up a trailer by providing adjustable camera views of

the trailer and surrounding area. The cameras are mounted

on the side mirrors and the images will be displayed

side-by-side on the touchscreen. Left and right camera

images are swapped and mirrored on the touchscreen to

show the equivalent area behind the vehicle as though the

driver is using the side mirrors.

Activation

The Trailer Reverse Guidance feature can be activated by

pressing the Trailer Reverse Guidance button on the touch

screen.

Содержание Chassis Cab 3500 2019
































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы:

RAM Commercial Chassis Cab 3500 2019, Руководство пользователя, Страница: 337 / 607

Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы: