RAM Commercial Chassis Cab 3500 2019 Скачать руководство пользователя страница 136

Страница: 136 / 607

134 GETTING TO KNOW YOUR INSTRUMENT PANEL

Trailer Tow

Push and release the

down

arrow button until the

Trailer Tow menu item is highlighted in the instrument

cluster display. Push and release the

right

arrow button and

the next screen will display the following trailer trip infor

mation:
• Trip (trailer specific) Distance: Push and hold the

right

arrow button to reset the distance.

• Trailer Brake

• Output

• Type

• Gain

• Trailer Tire Pressure — If Equipped

Audio

Push and release the

down

arrow button until the

Audio Menu icon/title is highlighted in the instrument

cluster display. This menu will display the audio source

information, including the Song name, Artist name, and

audio source with an accompanying graphic.

Phone Call Status

When a call is incoming, a Phone Call Status pop-up will

display on the screen. The pop-up will remain until the

phone is answered or ignored.

NOTE:

The call status will temporarily replace the previous media

source information displayed on the screen. When the

pop-up is no longer displayed, the display will return to the

last used screen.

Stored Messages

Push and release the

down

arrow button until the

Messages Menu item is highlighted. This feature shows the

number of stored warning messages. Push and release the

right

left

arrow buttons to cycle through stored messages.

Screen Setup Menu Item

Push and release the

down

arrow button until the

Screen Setup menu item is highlighted in the instrument

cluster display. Push and release the

right

arrow button to

enter the Screen Setup submenu. The Screen Setup feature

allows you to change what information is displayed in the

instrument cluster as well as the location that information is

displayed.

Содержание Chassis Cab 3500 2019
































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы:

RAM Commercial Chassis Cab 3500 2019, Руководство пользователя, Страница: 136 / 607

Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы: