RAM Commercial Chassis Cab 3500 2019 Скачать руководство пользователя страница 571

Страница: 571 / 607

MULTIMEDIA

569

Voice Text Reply — If Equipped

Uconnect announces

incoming

text messages. Push the VR

button or Phone button (if enabled) and say “

Listen

.”

(Must have compatible mobile phone paired to Uconnect

system.)
1. Once an incoming text message is read to you, push the

VR button or Phone button (if enabled). After the

beep, say: “

Reply

.”

2. Listen to the Uconnect prompts. After the beep, repeat

one of the pre-defined messages and follow the system

prompts.

NOTE:

Only use the numbering listed, otherwise the system does

not transpose the message.

TIP:

Your mobile phone must have the full implementation of the

Message Access Profile (MAP)

to take advantage of this

feature. For details about MAP, visit

UconnectPhone.com

PRE-DEFINED VOICE TEXT REPLY RESPONSES

Yes.

Stuck in traffic.

See you later.

No.

Start without me.

I’ll be late.

Okay.

Where are you?

I will be 5 <or 10,

15, 20, 25, 30, 45,

60> minutes late.

Call me.

Are you there yet?

I’ll call you later. I need directions.

See you in 5 <or

10, 15, 20, 25, 30,

45, 60> minutes.

I’m on my way.

Can’t talk right

now.

I’m lost.

Thanks.

Содержание Chassis Cab 3500 2019
































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы:

RAM Commercial Chassis Cab 3500 2019, Руководство пользователя, Страница: 571 / 607

Результаты поиска

Содержание Chassis Cab 3500 2019

Отзывы: