Figure 86:
Pattern selection window when changing patterns on a specific line in dual
product mode
To select a new pattern, and subsequently reset the pallet, select a pattern from the list and
press the ‘Save’-button. Press ‘Back’ to keep the current pallet as is. It is also possible to
stop using the production line by unchecking the ‘Production line in use’-checkbox.
7.3.3 Partial Pallet
Note
This feature only applies to the
first
pallet that is palletized. The remaining pallets will
be palletized according to the selected pattern.
Note
This description of the ‘Partial Pallet’-feature applies to both single and dual product
mode (as described in
and
).
To alter the start conditions on a pallet or the stop conditions, use the partial pallet feature.
Once a pattern is selected in the ‘Pattern Selection’-dialog, a new dialog will open by clicking
on the ‘Partial Pallet’ button.
In this dialog it is possible to edit two aspects of the selected pattern:
Version 2.9.1
© Rocketfarm AS 2021. All rights reserved.
95
Содержание URCap
Страница 1: ...Pally URCap User Manual Version 2 9 1 ...
