COMPUTER INTERFACE
5-15
-- With
Scheduled start/stop,
all the entry boxes for
year, month, day, hour and minute for both start and stop
time must be entered to specify when the datalog is to
occur.
Run Time:
If
manual start/stop
mode for datalogging is chosen, the
user needs to specify a maximum run time. After the
monitor has been on for the specified run time,
datalogging will be turned off automatically.
Start Time and Stop Time:
If
scheduled start/stop
mode is chosen for datalogging,
all entry boxes must be completed for start and stop year,
month, day, hour and minute. The monitor must already
be turned on. Then once the start date/time is reached,
the monitor will start datalogging. When the stop
date/time is reached, the datalogging will stop
automatically. With
periodic start/stop
mode, the hours
and minutes are used for the datalog period to be run each
day.
OK/Cancel:
When the configuration changes are completed, click on
the
OK
button to save the configuration and return to the
client window, or click on the
Cancel
button to abort the
configuration changes.
In the
Gas Parameters
tap, the user can change alarm
limits, correction factors, etc. To perform the same
function as in Section 4.4.3 to 4.4.5.
In the
Others
tap, the user can put in a power-on-
customized name . The name will be displayed when the
unit is powered on.
