PROGRAMMING
4-30
4.7.2
Change Site ID
The user can enter an 8-digit alphanumeric site ID in the
programming mode. This site ID will be included in the
datalog report.
1. “Change Site ID?” is the second sub-menu item in the
Monitor Setup menu (Table 4.7).
2.
Press the
[Y/+]
key and the display shows the current
site ID: “Site ID = xxxxxxx” with the left most digit
flashing.
3.
Press the
[Y/+]
or
[N/-]
key to cycle through all 26
letters and 10 numerals. Press
[MODE]
momentarily
to advance to the next digit. The flashing digit will
move to the next digit to the right. Repeat this process
until all 8 digits of the new site ID are entered.
4.
Press and hold the
[MODE]
key for 1 second to exit the
data entry mode.
5.
If there is any change to the existing site ID, the display
shows “Save?” Press the
[Y/+]
key to accept the new
site ID. Press the
[N/-]
key to discard the change and
move to the next sub-menu.
