v
Special Notes
-1-
When the MiniRAE 2000 Monitor is taken out from the
transport case and turned on for the first time, there
may be some residual organic or inorganic vapor
trapped inside the detector chamber. The initial PID
sensor reading may indicate a few ppm. Enter an area
known to be free of any organic vapor and turn on the
monitor. After running for several minutes, the
residual vapor in the detector chamber will be cleared
and the reading should return to zero.
-2-
The battery of the MiniRAE 2000 monitor will
discharge slowly even if it is turned off. If the monitor
has not been charged for 5-7 days, the battery voltage
will be low. Therefore, it is a good practice to always
charge the monitor before using it. It is also
recommended to fully charge the monitor FOR AT
LEAST 10 HOURS before first use. See Section 7 for
more information on battery charging and
replacement.
STATIC HAZARD:
Clean only with damp cloth.
DANGER RISQUE D'ORIGINE
ELECTROSTATIQUE:
Nettoyer uniquement avec un chiffon humide.
