PROGRAMMING
4-35
4.7.7
Change Time
To change the time in the RTC of the MiniRAE 2000:
1.
“Change Time?” is the seventh sub-menu item in the
Monitor Setup menu.
2.
Press
[Y/+]
and the display shows the current time in
the 24-hour format “hh : mm” with the left most digit
of the time flashing.
3.
To modify this value, use the
[Y/+]
or
[N/-]
key to
change the digit value and press the
[MODE]
key
momentarily to advance to the next digit. The flashing
digit will move on to next digit to its right. Repeat this
process until the new date and time values are entered.
Press and hold the
[MODE]
key for 1 second to exit
data entry mode.
4.
If there is any change to the existing value, the display
shows “Save?” Press
[Y/+]
to confirm the new value or
press
[N/-]
or
[MODE]
to discard the changes and
move to the next sub-menu.
