OPERATION
2-8
2.4.1
Survey Mode
After the monitor is turned on, it runs through the start up
menu. Then a message
“Ready..”
is displayed (see figure
below). At this point, the user has two options; 1) step
through the operation menu, or 2) take a measurement.
Press the
[MODE]
key to cycle through the idle operation
menu. The PID sensor and pump are turned off during this
idle operation.
Main operation menu displays include:
•
“Ready…”
•
Avg reading
•
Peak reading
•
Run time
•
Current battery voltage and shutdown voltage
•
Date, time and temperature
•
Log on/off?
•
PC communication?
•
Survey, Site ID and Gas Name
Ready …
