Procedure
Step 1
Select Configuration
.
Step 2
Select Conferences.
Step 3
Locate the Services list section.
Step 4
Select the Review button
next to the service.
Step 5
Enter the new prefix number.
Step 6
Select Apply.
Setting the MCU Interface Languages
The MCU supports a number of interface languages which can be set as part of its initial
configuration.
•
About Supported Languages ............................................................... page 30
•
Setting the MCU User Interface Language ............................................... page 31
•
Setting a Text Overlay Language ......................................................... page 32
About Supported Languages
The MCU has three user interfaces:
•
Administrator interface
The web-based interface used by administrators for configuration and maintenance tasks.
•
Conference Control interface
The web-based interface used by administrators and operators for conference moderation
and video layout control.
Note
This interface is not available when the MCU is registered to Scopia Management.
•
Text overlay on conference video
The set of menus that appear in the conference video.
The Scopia Elite MCU supports the same languages for the Administrator and Conference
Control interfaces, and a different set of languages for the text overlay.
RADVISION | Installation Guide for Scopia Elite 6000 Series MCU Version 8.0
Performing the MCU Initial Configuration | 30
