Radix ALPHA 4000 PVR, Руководство пользователя

Страница: 43 / 70

44
Example 2>> Timer Recording
■ You can use the timer function for unattended recordings
on HDD or on a conventional VCR that has been
connected to the VCR SCART connector of this unit.
You can also use the timer function for automatically
switching your receiver ON/OFF or changing the TV
program at a preset time in case you don’t want to miss
the start of a program but want to watch another channel
until then.
■ The timer function allows you to set up a list with all the
required timer settings in which you can enter the date
and time for the receiver to be switched on and off, the
program and if necessary daily or weekly repeat of each
switching operation.
■ If you are currently watching a program and timer
switching operation is pending, the receiver reminds
you by overlaying a massage that the timer switching
operation will take place in one minute. When this time
is reached, the receiver switches over to the required
channel and REC is displayed on the front display. After
the preset time has expired, the receiver switches back
to the original channel.
Example 3>> Using the Timeshift Recording
Let us assume that the phone is ringing while you are
watching TV.
You do not want to miss anything of the program, so you
decide to start the timeshift recording while you answer the
phone.
While watching TV, just press the timeshift relative button.
■ The picture will freeze, no sound will be heard and the
recording will start.
■ Time shift enables you to follow a running program with
a delay of up to 120 minutes.
Let us assume again that 10 minutes later the situation is
like this:
■ A frozen picture on the TV and no sound.
■ Of course, you would like to watch now the timeshift
recording that contains your missed 10 minutes.
■ You start the playback of the timeshift recording by
pressing the PLAY(►) button.
Note: Further recording is still in progress during the
playback in the timeshift mode.
Recording
Radix_Eng.indd 44 2006-09-15 ｿﾀﾀ・11:38:06