Radix ALPHA 4000 PVR, Руководство пользователя

Страница: 20 / 70

21
EN
G
LIS
H
Selecting USALS using the YELLOW colour button in
DiSEqC menu.
1
. Input the value of latitude and longitude in which the
dish-installer is placed.
2 . As the satellite that you want to target was selected in
the last menu, it is possible to press the OK button in
Rotate .
3 . Then the degree of an angle for rotate will be calculated
automatically and the DiSEqC Motor will adjust to rotate
the dish to the previously selected target satellite.
4 . When you set this procedure, notice the following point,
that is, the zero degree of DiSEqC Motor must be
headed for the due North at initial setup status.
2.2.4 Renaming the Satellite
You can rename a satellite name.
1 . Select the satellite name you would like to rename using
the Arrow(▲/▼) buttons and press the OK button in the
Channel Search
mode.
2. Press the RED button to access the Edit mode.
3. Press the GREEN button to access the Rename.
4. Enter the desired satellite name on the screen keyboard
using the Arrow(▲/▼/◄/►) buttons.
5. Press the BLUE button to save.
To prompt menu commands:
■ OK: Confirms the selection.
■ BACK: Deletes typed name.
■ EXIT: Cancels the command.
Adjusting Initial Settings and Operations
Radix_Eng.indd 21 2006-09-15 ｿﾀﾀ・11:37:54