Radix ALPHA 4000 PVR, Руководство пользователя

Страница: 17 / 70

18
2.2.2 Channel Scanning
Perform the following setup procedure for scanning the
satellite. Follow the instructions below to scan satellite
channels. You can enjoy watching TV or listening to the
Radio after the procedure completes.
1 . Press the MENU button.
2 . Select Installation using the Arrow (◄/►) buttons.
3 . Select Channel Search using the Arrow(▲/▼) buttons,
and then press the OK button.
4 . Set the Satellite .
Select Satellite you want to edit using the Arrow(▲/▼)
buttons, and then press the RED button to move satellite
edit menu.
5 . Select the Tuner .
PVR has two tuner input. Select either one using the
Arrow(◄/►) buttons.
6 . Set the Ant Connect .
When Tuner 2 selected, the “ ant connect ” will be
displayed. You can select antenna connection mode
using the Arrow(◄/►) buttons.
For information about the Loop / Split / Dual mode
support , see page 13, “Recommended Antenna
Connection.”
7 . Set the LNB Power .
Depending on the type of LNB cling to your antenna, you
can supply the LNB power by setting it to On .
8 . Set the LNB Osc. (Frequency).
You can select the predefined Local Frequency ( 0….9 ,
UniCable , Universal , 10750 , 10600 , 9750 , 5150MHz ,
Onecable1 or Onecable2 ) using the Arrow(◄/►)
buttons or manually enter a specific frequency in MHz
unit using the numeric buttons. You can input the number
only when it displays “0…9”.
Note: If you have selected Universal , select 9750/10600 .
In this case, the 22KHz tone value is disabled.
Adjusting Initial Settings and Operations
Radix_Eng.indd 18 2006-09-15 ｿﾀﾀ・11:37:52