Radix ALPHA 4000 PVR, Руководство пользователя

Страница: 19 / 70

20
14 . Press the GREEN button to scan.
■ Network: If you want to have all other Transponder
information, you need to Select network to
ON
.
■ Search Mode: You can select ALL /FTA option mode
in each satellite using the Arrow(◄/►) buttons.
15 . Press the OK button.
STB will automatically scan all TV/Radio channels from
a satellite and save them into the channel list.
You can see the progressive status of channel searching.
Press the RED or EXIT button to stop channel searching.
When the channel searching is complete, the result will
be saved and the first channel of the searched ones
displays.
Note: Please wait for the receiver to process all the
channels, and note that the Channel Search procedure may
take a few minutes.
2.2.3 Setting up the Motor Antenna
If you use Motor Antenna, which is operated by motor, you
should set the antenna as Motor before Channel Search.
You can set the following option when LNB 1 or LNB 2 is set
to the motor antenna.
Selecting MOTOR using the YELLOW colour button in
DiSEqC menu.
■ DiSEqC 1.2 Motor: You can move the motor to the left
or right by using the Arrow(◄/►) buttons continuously,
but when you stop pressing the Arrow(◄/►) buttons,
the motor will be stopped.
■ Save: When you press the OK button, current position of
the DiSEqC motor will be saved.
■ Go to Reference: Move to the position “ O .”
■ Calculation: The difference between the current position
and the new position of the current satellite is applied to
all the other satellite also.
■ Limit: You can set the maximum move extent. You can
control the Enable or Disable mode. When you select
Enable
,
East Limit
and
West Limit
will activate. Press
the OK button, then current position will be restored as
each limit.
■ Reset: After select the Reset and press the OK button,
the original value of motor will be restored.
Adjusting Initial Settings and Operations
Radix_Eng.indd 20 2006-09-15 ｿﾀﾀ・11:37:54