Radix ALPHA 4000 PVR, Руководство пользователя

Страница: 11 / 70

12
1.3.2 Connecting Your TV with Motorized System
Using DiSEqC 1.2
There are two ways to connect the receiver to your existing TV system.
Use one of the following cases for the best result:
■ Connect a video cable between VIDEO output jack on your receiver
and VIDEO input jack on the TV. Connect an audio cable between
AUDIO (L, R) output jacks on your receiver and AUDIO (L, R) input
jacks on your TV.
■ Connect a scart cable between SCART (TV) output jack on your
receiver and SCART input jack on your TV.
Second, connect one end of your coaxial cable to the LNB input
connector of your receiver and the other end to the DiSEqC 1.2 motor.
Using DiSEqC 1.0 Connection
All our receivers are designed to be DiSEqC 1.0 and DiSEqC 1.2
compatible.
This allows multiple antennas to be connected to the STB at the same
time.
If you have two or more fixed antennas or LNBs, use a DiSEqC 1.0
switch. Connect the coaxial cable from the first LNB to the LNB 1 or
LNB A input connector of the DiSEqC switch. Do the same for any other
LNBs that you have.
Connect one end of a coaxial cable to the RF output connector of the
DiSEqC switch. Connect the other end to the LNB IN socket on the
STB.
To the digital receiver, you can connect either a single satellite antenna
directly or LNB of multi-feed equipment.
Using USALS System
For more information about using USALS system, see page 20, “Setting
up the Motor Antenna.”
Getting Started
Radix_Eng.indd 12 2006-09-15 ｿﾀﾀ・11:37:46