深圳市乐迪电子有限公司
74
of changes in pitch of blades, weather conditions, etc. Governors are extremely popular in competition
helicopters due to the consistency provided.
How does it help in helicopter setup? The governor eliminates the need to spend large amounts of time
setting up throttle curves, as it automatically adjusts the engine’s RPM to maintain the desired head speed
.
Adjustability:
• On/off may be separate from speed switching by plugging
governor on/off into CH8 and changing CUT-CH setting.
• If using separate on/off, switch assignment is totally adjustable.
Be careful not assign governor off to a condition switch if you
want the governor to function in that condition.
• Speed switching and governor ON/OFF may be together using one switch or ON/OFF switching may be
performed using an independent switch/channel.
• When speed setting control uses CH7 and separate ON/OFF switch is not used, CH8 can be used for other
functions.
• In-flight adjustment of the head speed (for easy adjustment during turning) may be created using an
additional channel and a programmable mix.
The GV-1 controls throttle when it is active, so the throttle will not obey any Failsafe settings preset for
throttle in the transmitter. Always set the Failsafe setting for the GV-1's on/off channel to OFF. This way the
governor is shut off and the throttle obeys the Failsafe throttle commands.
Goals
Steps
Inputs
Set up a governor to
use
both channels into the
receiver and switch between
the governor settings
automatically when changing
conditions. Consider setting
the battery Fail Safe settings
and other helpful functions
on the governor itself.
Open and activate the
GOVERNOR Function.
to BASIC menu,
again to
ADVANCE
to GOVERNOR
Activate the function.
to MIX
，
to ACT.
Optional: change cut-off
channelto channel 8 and
assign switch and direction
for on/off (channel 8).
to -cut- CH:
，
to
+CH8
，
to -cut-SW
，
to desired SW
Optional: Changes switch
assignment to select
to SW
，
to Cond
，
