RadioLink AT9S PRO, Инструкция по эксплуатации

Страница: 62 / 82

深圳市乐迪电子有限公司
www.radiolink.com
62
spoiler servo position
to 60%
Activate the function.
to MIX
，
to ON.
Assign the SPO2-CH.(Ex:
CH3)
to –SPO2- CH
，
to CH3
，
Adjust the spoiler servo
position. (Ex:
SPO1/SPO2=+55% to
to –SPO1-POSI to -50%,
，
to 60%,
to –SPO2-POSI to +50%,
，
to 60%,
Optional: Set the elevator
rate.(Ex:10%)
to –rate- ELEV
，
to 10%
，
Optional: set the delay.
(Ex:25%)
to –dly- ELEV
，
to 25%
，
Close
3.2.10 FLAP-TRIM
The setting of FLAP-TRIM of glider is the same with that of acrobasic. Click here or go to page 44 to check the
detailed setting method.
3.2.11 CONDITION
Channel 3's function is selectable in the ARBK-FUNC item.
(Throttle stick, switches, or knobs) By choosing except STK,
channel 3's function may be separated from Butterfly’s function,
so channel 3 can be used for other functions.
Adjustability:
• Channel 3's function:
STK: THROTTLE STICK
Sw-A to H: SWITCH A to H
Vr-A to Vr-E: KNOB A to E
3.2.12 SERVO-DLY
The setting of SERVO-DLY of glider is the same with that of acrobasic. Click here or go to page 56 to check
the detailed setting method.
3.2.13 BUTTERFLY (crow) mixing
BUTTERFLY simultaneously moves the flaps, twin ailerons