9
1.2.5 Basic Usage and Settings
Buttons and switches
MODE Button : Long press MODE button to enter BASIC MENU or ADVANCE MENU, short press
the MODE button to switch the MENU.
END Button : Once press to enter SERVO display starting from start-up screen or exit from the
any parameter setup menu, Twice press to enter RECEIVE display staring from start-up screen.
PUSH Button : Rotate the PUSH button to move the cursor or modify the parameter value of the
function, Short press or Long press the PUSH key to confirm.
Usage example
：
Reduce the EPA(End Point Adjustments) of “4: RUDD”.
1.
Long press the
to enter the "BASIC MENU", rotate the
to move the cursor to "END
POINT", short press the
to confirm and enter the EPA setting interface.
2. In "END POINT", rotate the
to move the arrow to "4: RUDD", short press the
to select, push
the Rudder Stick to the left, move the cursor to the left percentage,and rotate the
to modify the
percentage (the larger the percentage, the larger the EPA of the servo), press the
to confirm, and press
the
to return.
Note
：
For normal functions, short press the
to confirm, but when modifying the "MODEL SEL" and
"MODE TYPE", long press the
for 1 second to confirm.
Throttle/Rudder/Aileron/Elevator Stick controls 1 to 4 channels by default.
Two VR knob switches and two VR slider switches on the back meet the needs of pan/tilt control,
and the functions of these switches can be customized.
Toggle switch, AT9S Pro has 4 two-stage switches, 3 three-stage switches and a reset switch. All
switches can be customized function setting. For details, please refer to www.radiolink.com.
SWITCH ASSIGNMENT TABLE
• The factory default functions activated by the switches and knobs for a AT9S Pro transmitter are
shown below.
• Most AT9S Pro functions may be reassigned to non-default positions quickly and easily.
Always check that you have the desired switch assignment for each function during set up.
Switch/Knob
A or H
Airplane (
ACRO
)
Sailplane/Glider
(
GLID
)
Helicopter (
HELI
) MULTIROTOR
SWITCH A
elevator dual rate
ch10
elevator dual rate
down
=butterfly on
ch10
elevator dual rate
ch10
elevator dual rate
ch10
