RACOM RipEX2, Руководство пользователя

Страница: 190 / 248

Source IP
The local IP address of RipEX2 unit originating RSS ping. Blank field (equal to 0.0.0.0 address) is
used to assign the source address automatically - address is assigned automatically according to
the routing rules.
Go on
List box {On; Off}, default = “Off”
Go on mode. When Enabled, RSS pings are sent immediately after receiving the RSS ping reply
(Period parameter is ignored).
Traces reserved
The RSS ping also contains data about the route (RSS, MSE), this parameter allows to set number
of radio hops within the network to be measured. Radio hop is measured in both directions, so the
number has to be higher than number of hops in route multiplied by 2 (for example: link consisting
of 2 radio hops needs 5 traces to be reserved).
Output:
• MC – Encodes Modulation and Coding – see transcription table:
Tab. 8.2: Translation table for Modulation rates and FEC
FEC Modulation
FEC off 2CPFSK 00
FEC 3/4 01
FEC off 4CPFSK 10
FEC 3/4 11
FEC off DPSK 80
FEC 3/4 81
FEC off pi/4 DQPSK 90
FEC 3/4 91
FEC off D8PSK A0
FEC 3/4 A1
FEC off 16DEQAM B0
FEC 3/4 B1
FEC off 64QAM C0
FEC 3/4 C1
FEC 5/6 D0
FEC 2/3 D1
FEC off 256QAM E0
FEC 3/4 E1
FEC 5/6 F0
FEC 2/3 F1
• RSS – Radio Signal Strength [dBm] - measured within the header reception
RipEX2 Radio modem & Router – © RACOM s.r.o. 190
Diagnostics