RACOM RipEX2, Руководство пользователя

Страница: 107 / 248

Rule 192.168.1.0/24{24,32} captures 192.168.1.0/24 and all subnets (for example 192.168.1.1/32)
Rule 10.9.8.7/32{8,32} captures all ranges having the mask longer than 8 covering the address
10.9.8.7 (e.g. 10.9.0.0/16)
Action
List box {Accept; Reject; Pass}, default = "Accept"
Type of action to be performed when the filter rules above matches the incoming routing rule. When
“Pass” is selected, the packet processing continues.
Set preference
List box {On; Off}, default = "Off"
When enabled, the Preference (see next parameter) will be set to this rule.
Preference
Number {0 – 65535}, default = 210
Routing rule preference in the routing table (to be used when Set preference is enabled). The
higher the number the better the preference.
Local preferred source address
IP address, default = 0.0.0.0
Preferred source IP address for the locally generated packets. When disabled (default value 0.0.0.0
is used), the source IP address is set according to the outgoing interface.
Note
Informational note
7.2.2.6. Export filter
BABEL export filter rules define set of routing rules to be exported from the unit to other BABEL routers.
The order of rules matters. Maximum number of filter rules is 256.
Active
List box {On; Off}, default = "On"
Enables / disables the filter rule.
Filter network
List box {Off; Match; Not match}, default = "Off"
Method of the routing rule target range comparison.
107 © RACOM s.r.o. – RipEX2 Radio modem & Router
Settings