RACOM RipEX2, Руководство пользователя

Страница: 121 / 248

Mask from
Number {0 – 32}, default = 0
Mask to
Number {0 – 32}, default = 32Definition of the enabled range of the mask length of the processed
routing rule.
Filter protocol
List box {Off; Match; Not match}, default = "Off"Selects the way how the routing rule source protocol
is compared.
Protocol
List box {System; OSPF}, default = "System"Selection of the protocol origin. "System" – stands for
rules from the ordinary routing table. "OSPF" stands for rules from the OSPF protocol.
Filter OSPF source
List box {Off; Match; Not match}, default = "Off"Selects the OSPF routing rule source comparison
mode.
OSPF source
List box {Internal; Inter-area; External type 1; External type 2}, default = "External type 2"OSPF
sources. "Internal" – stands for internally generated rule (e.g. interface range). "Inter-area" – stands
for rule generated on the area borders.
Filter OSPF tag
List box {Off; Match; Not match}, default = "Off"Selects the way of filtering based on OSPF tag.
OSPF tag
Number {0 – 2
32
-1}, default = 0OSPF tag to be compared. The tag is added to a rule when inserted
to OSPF.
Action
List box {Accept; Reject; Pass}, default = "Accept"Defines what action is taken on the routing rule.
"Pass" continues in processing.
7.2.4.7. Import OUT rules
Import OUT filter [PP1] rules. The order of rules matters. Maximum number of filter rules is 256.
Filter policy
List box {Accept; Reject}, default = "Accept"Defines what action is taken on the routing rules which
were not captured (i.e. fallback) in the
Import OUT filter .
Filter limit
Number {1 – 65535}, default = 1024Limit of the accepted routing rules from the neighbor. The limit
applies before this Import OUT filter. Excess rules are dropped.
Active
List box {On; Off}, default = "On"Enables / disables the filter rule.
Note
Informational note.
121 © RACOM s.r.o. – RipEX2 Radio modem & Router
Settings