RACOM RipEX2, Руководство пользователя

Страница: 159 / 248

Authentication
List box {MD5_legacy; SHA1_legacy; SHA224; SHA256; SHA384; SHA512}, default =
"SHA256"Authentication algorithm. Legacy algorithms are not recommended to use, they are
available for compatibility reasons only.
Authentication passphrase
String {8–128 char}, default = <empty>Passphrase used for authentication with SNMP server.
Encryption
List box {DES_legacy; AES128; AES192; AES256}, default = "AES128"Encryption algorithm.
Encryption passphrase
String {8–128 char}Passphrase used for data encryption when communicating with SNMP server.
Engine ID mode
List box {Default; User defined}, default = "Default"Engine Id serves for unique identification of the
SNMP instance (i.e. the RipEX2 unit) according to RFC3411. When the "Default" Engine ID mode
is selected the MAC address of the Eth1 interface is used for the unique part of the Engine Id (the
whole Engine ID example: 800083130302a92006ef).
Engine ID
String {1–27 char}When "User defined" Engine ID mode is selected the differentiated part of the
Engine ID can be entered as ASCII characters or generated (e.g. U3qPrisWoDYbBVNsAWluZY-
GL3M5). This string is converted into HEX number (i.e. 55 33 71 50 72 69 73 57 6f 44 59 62 42 56
4e 73 41 57 6c 75 5a 59 47 4c 33 4d 35). The whole Engine ID for mentioned ex-
ample:800083130455337150726973576f44596242564e7341576c755a59474c334d35.
Notification
Notification is used for asynchronous notification from a RipEX2 unit into the SNMP server.
Notification mode
List box {Off; Trap; Inform}, default = "Off"Mode of notification; Inform is not supported by SNMPv1
Notification version
List box {v1; v2c; v3}, default = "v2c"Notification packets version.
Inform repeats
Number {0 – 10}, default = 3Number of repeats used when Inform acknowledge was not received.
Inform timeout [s]
Number {1 – 20}, default 10Inform acknowledge timeout.
Notification destinations
Destination IP
IP address {0.0.0.0}, default 0.0.0.0IP address of SNMP server receiving notification packets.
Destination port
Number {1 – 65535}, default = 162Notification packets destination port.
7.6.5. SW keys
Certain RipEX2 features needs to be activated by a SW key to be available. When the respective SW
key is not present, the feature cannot be configured. If the feature is enabled in a configuration backup
159 © RACOM s.r.o. – RipEX2 Radio modem & Router
Settings