RACOM RipEX2, Руководство пользователя

Страница: 72 / 248

ACK
List box {On; Off}, default = "On"
General setting of acknowledging of received packets. It can be set differently in individual link op-
tions.
Retries
Number {0 – 15}, default = 3
Foreign packets RSS threshold [-dBm]
Number {50–150}, default = 120
When the received foreign packet (the packet which is not addressed to the actual unit) has
weaker signal (the listed number bigger, e.g. the limit 120 - in minus dBm - compared with actual
RSS -126 dBm ), the channel is evaluated as free. If the foreign packet RSS is over this limit, the
channel is occupied and the unit will wait till the end of it with the procedure of transmission.
Repeat COM broadcast
List box {On; Off}, default = "Off"
When On the broadcasted COM packets will be retranslated into the radio channel. When Off these
packets will not be repeated.
7.1.2.6.1. Individual link option
It is possible to add some exceptions for radio links with particular conditions (e.g. longer or shorter
ones than common).
The individual link is defined by Counterpart radio IP . For this link it is possible to set individually
Modulation, FEC, ACK, Retries.
Retries are used to set a number of repeats, when the packet is not acknowledged (in case of ACK
ON). The standard number of retries is 3.
7.1.2.7. Advanced radio parameters
The Advanced setting option allows to customize radio and radio protocol parameters. Typically these
parameters should remain on default values.
These settings you can find in ADVANCED/Interfaces/Radio/ menu
RipEX2 Radio modem & Router – © RACOM s.r.o. 72
Settings