RACOM RipEX2, Руководство пользователя

Страница: 191 / 248

• hMSE – Phy header modulation Mean Squared Error [dB] - measured within the header reception
• dMSE – Data modulation Mean Squared Error [dB] - measured within the frame data part reception
8.7.3. Routing
Routing tool provides the next hop routing information of the given IP address.
Destination IP
The examined IP address.
Output
Output section provides the following details:
• Examined address (example: 8.8.8.8)
• Next hop (gateway) address (example: via 192.168.141.254)
• Next hop interface (example: dev if_bridge)
• Outgoing packet Source address (example: src 192.18.141.210)
8.7.4. RF Transmission test
RF Transmission test
Pre-defined type of RF signal can be transmitted for a specific purpose.
• Type
List box {Random data; Carrier wave; Single tone}, default = "Random data"
Type of transmitted signal during the test. In case of Single tone a frequency with an offset from
the central frequency is transmitted.
• Period [s]
Number {1 – 120 s}
Transmission test pre-set duration.
• Start button
Starts the transmission test
• Stop button
Allows to stop the test before the pre-set time.
191 © RACOM s.r.o. – RipEX2 Radio modem & Router
Diagnostics