RACOM RipEX2, Руководство пользователя

Страница: 183 / 248

8.5.1. Settings
Save button - saves the new settings of the monitoring parameters.
Refresh monitoring data button - refreshes the settings menu according to the statistics status saved
in the unit. The difference between the displayed and saved status can occur for example when the
status is changed in different browser tab.
8.5.1.1. Overview
All status (On/Off) of individual interfaces are displayed on this place for quick overview on monitoring
settings.
8.5.1.2. Interfaces
This section allows detailed settings of very particular monitoring parameters for all individual interfaces.
Common parameters for several interfaces:
Rx enabled, Tx enabled
List box {On; Off}, default = "On"
A packet is considered a Tx one when it comes out from the respective software module (e.g. RADIO
or Terminal Server) and vice versa. When an external interface (e.g. Interface COM) is monitored,
the Tx also means packets being transmitted from the RipEX2 over the respective interface (Rx
means "received"). Understanding the directions over the internal interfaces may not be that
straightforward, please consult
Fig. 8.2, “Interfaces” above for clarification.
All
List box {On; Off}, default = "On"
Monitoring output can also be limited by IP protocol type. Select Off to be able to enable/disable
specific protocol output individually - see next parameter(s).
UDP
/ TCP / ICMP / Other / ARP List box {On; Off}, default = "Off"
Monitoring output of specific IP protocol limitation.
Offset [B]
Default = 0
Number of bytes from the beginning of packet/frame, which will not be displayed - the monitoring
output is truncated by 'Offset' bytes at the beginning of the message.
Length [B]
Default = 32
Number of bytes to be displayed from each packet/frame.
Example: Offset=2, Length=4 means, that bytes from the 3rd byte to the 6th (inclusive) will be dis-
played:
Data (HEX):
01AB 3798 A285 93CD 6B96
Monitoring output: 3798 A285
Bandwidth
List box {LOW; NORMAL; HIGH; UNLIMITED}, default = "NORMAL"
183 © RACOM s.r.o. – RipEX2 Radio modem & Router
Diagnostics