RACOM RipEX2, Руководство пользователя

Страница: 196 / 248

56 kHz @ -3 dB BW applicable for 6.25; 12.5; 25 kHz
500 kHz @ -3 dB BW applicable for 50; 100; 150; 200; 250; 300
kHz
Anti-aliasing Selectivity
< 2 ms @ 6.25 kHz channel
< 1.0 ms @ 12.5 kHz channel
< 0.7 ms @ 25 kHz channel
Tx to Rx Time
20 dBm (100 mW) Maximum Receiver Input Power
< -57 dBm Rx Spurious Emissions (Conducted)
< -57 dBm Radiated Spurious Emissions
> -23 dBm @ 1 MHz
> -19 dBm @ 2 MHz
> -15 dBm @ 5 MHz
> -13 dBm @ 10 MHz
Blocking or desensitization
> 70 dB Spurious response rejection
Technical parameters are subject to change without prior notification.
Network throughput varies and depends heavily on the data structure, optimization effectivity,
protocol on Radio channel, network topology, signal budgets and many other parameters of the
network. Practical tests are recommended.
1)
Available only in Bridge mode.
2)
Max peak envelope power (PEP) 10 W (40 dBm) .
3)
Electrical
10 to 30 VDC, negative GND Primary power
8 W / 13.8 V, see details Rx
12 – 55 W, see details Tx
0.01 W Sleep mode
5 W Save mode
Interfaces
4× RJ45 10/100/1000Base-T Auto MDI/MDIX Ethernet
1× SFP 10/100/1000Base-T or 1000Base-SX
or 1000Base-LX
user exchangeable SFP with max. power con-
sumption 1.25 W
SFP
DB9F RS232 / RS485 SW configurable
COM
600 b/s – 1 Mb/s
Host A USB 3.0 USB
2× TNC female 50 Ω
SW configurable
1× Tx / Rx or 1× Rx + 1× Tx
Antenna
Power
connector 1× HW alarm input
1× HW alarm output
1× Sleep input
Inputs/Outputs
RJ45 2× DI, 2× DO, 1× difDI
RipEX2 Radio modem & Router – © RACOM s.r.o. 196
Technical parameters