RACOM RipEX2, Руководство пользователя

Страница: 58 / 248

6.5. Help
This functionality is available on individual web pages of the graphical user interface by clicking of the
purple box with the question mark on the right upper corner (or in the middle) of the screen (according
to the width of the screen).
The content of the help is identical with the respective sub-chapter of the User manual.
6.6. Remote access
RipEX2 unit management is designed to work smoothly even when the unit under configuration is
connected via relatively slow radio channel. In case of locally connected unit - direct configuration of
the unit (accessing the unit IP address directly from the web browser) works fine. If the unit should be
connected remotely via the radio network, the so-called "Remote access" needs to be used to configure
and manage remote unit using bandwidth friendly volumes of transmitted data. Open the web browser,
enter the IP address of a locally connected unit and connect to a remote radio (which needs to be ac-
cessible from the locally connected unit via the RipEX2 network).
RipEX2 local unit must have the highest firmware version in the whole network to ensure proper Remote
access functionality. Nevertheless it is recommended to keep the same version of firmware in the whole
network. See details in chapter
Section 7.6.6, “Firmware”
Remote access can be activated via click on the Remote access button.
RipEX2 Radio modem & Router – © RACOM s.r.o. 58
Web interface