RACOM RipEX2, Руководство пользователя

Страница: 70 / 248

7.1.2.5.3. Base station - List of Remote stations
All frames (to and from Base station) for a given Remote are transmitted with modulation set in this
list. If the transaction is transmitted over a Repeater, the Repeater settings is not used.
BDP address (from), BDP address (to)
Protocol address [0 to 255] is the unique address assigned to each Remote and is only used by
Base driven protocol. It is set in Remote unit in its Radio protocol settings. The default and recom-
mended setting assigns Protocol address to be equal to the Radio IP last byte. If Protocol address
mode in Remote unit is set to Automatic, this assignment is done automatically. If a specific address
is required, fill both windows with the same number. If an interval is required, fill both windows with
needed numbers.
Modulation type
List box {2CPFSK; 4CPFSK; DPSK; π/4DQPSK; D8PSK; 16DEQAM; 64QAM; 256QAM}, default
= "2CPFSK"
Modulation and FEC settings for communication with terminal. Settings is used in both directions
of communication. If the terminal is behind repeater, the settings is used all the way (Repeater
settings is not used).
FEC
List box {Off; 2/3; 3/4; 5/6}, default = "Off"
For detailed description see Modulation type above.
ACK
List box {On; Off}, default = "On"
Frame acknowledge enable. Applies to data frames transmitted from Base.
Retries
Number {0 – 15}, default = 3
Frame retries count. Applies to data frames transmitted from Base.
Set value is used in one direction from Base to Remote (Remote to Base direction is configured in
Remote unit in its Radio protocol settings). If the Remote station is behind Repeater, set value is
used for both radio hops: Base station - Repeater and Repeater - Remote.
CTS Retries
Number {0 – 15}, default = 3
Based on sophisticated internal algorithm, Base station sends a CTS (Clear To Send) packet which
allows Remote station to transmit. If the Remote station is connected directly to the Base station
(not behind Repeater), and the Base station doesn't receive a frame from the Remote station, the
Base station repeats permission to transmit.
RipEX2 Radio modem & Router – © RACOM s.r.o. 70
Settings